CAN/CANopen & DeviceNet Products
Interfaces to other Systems and I/O Modules for the
Field Bus
Following we present all existing products to you. For download a product
data sheet
please click on the product name at the left collumn of the table.
The manuals of the CAN-Modules are listed in the right table columns.
|
|
The manuals of the CAN modules are listed in the right column of the table below. For free download of the manuals you need access rights. You will get the user name and the password upon request, if you click (You will get the user name and password for the software download upon request, too. Please click here.) |
Product news are listed at our News-Page.
| To read the PDF-files you can use the Acrobat Reader. You can receive a free version of this program when clicking the yellow 'Get Acrobat Reader' button: |  |
 Introduction into the CAN Bus Technology
(133
kbyte) |
Bosch
CAN-Specification Version 2.0 (188 kbyte) |
| Product
Name (Download of the product data sheets) |
Description |  Download
ManualOverview of Manuals |
| CAN-Software Documentation for Download | ||
 CAN-API |
The
Level 2-software support, the CAN-Application-Layer Interface
(CAN-API), is available for all PC-CAN interfaces and for the most
important operating systems: Windows 9x / ME / NT / 2K / XP / Vista, RTX, Linux, LynxOS, PowerMAX OS, Solaris, SGI-IRIX6.5, AIX, VxWorks, QNX4, QNX6, RTOS-UH Please note the order information in the data sheets. |
API
Manual 1 of 2: Function Description (800 kB)
|
| CAN-DOS-API |
Layer 2 DOS application interface (only for older applications). | |
| CANopen |
CANopen is supported by many esd-CAN interfaces for many operating systems. Here you can download the general CANopen Manager and CANopen Slave manuals of the CAN-PC modules. | |
| CAN-Software for Download |
Note:
CAN-drivers software can not be downloaded (except Linux drivers). Driver
updates can be requested by licensed customers from our support
team. A special registration is necessary to get access to the software-download area, because the Lizence Agreement has to be accepted. With this account you have access to the software-download area as well as the manual download area. |
|
| CAN-API
for Linux |
CAN-driver
software
NTCAN-API for Linux provided in encrypted ZIP-archives You will get the passwort to unzip the archives from the CAN-driver CD or on request from our support team if you already own a software driver licence. |
|
| CAN
SDKCAN Tools |
Software
Development Kit for NTCAN-API The SDK contains files necessary for software development, sample applications and projects and the CAN Tools with documentation (CANreal, CANplot, CANrepro, CANscript, COBview). |
|
| .NET |
Class library to control CAN-I/Os from within .NET framework for Windows and Linux with online documentation |
Download the free Windows MSI-package and the Linux archives for .NET |
| CAN-Starter-Kits | ||
| Windows-CAN-Starterkit |
Starterkit with PC-board, digital I/O-module, power supply, wiring, software for Windows NT/95/98 and instructions | Manuals (7 Documents) |
| VxWorks-CAN-Starterkit |
Starterkit with CAN-PC104/200 board, CAN-ISA/200 board, complete wiring, software for Windows (PC) and VxWorks (MBX-PowerPC), monitor program CANreal, instructions | Manuals (8 Documents) |
| Interfaces to Other Systems | ||
| PCI Express Boards | ||
| CAN-PCIe/200 |
Passive PCI Express CAN board, one or two CAN networks | |
| PCI-Bus Boards | ||
| CAN-PCI/200 |
Passive 33 MHz-PCI-CAN board, one or two CAN networks | |
| CAN-PCI/266 |
Passive 66 MHz-PCI-CAN board, one or two CAN networks | |
| CAN-PCI/331 |
Intelligent CAN PCI board, one or two CAN networks, 68331 microcontroller, also available for DeviceNet | Hardware Manual (440 kB) |
| CAN-PCI/360 |
High performance CAN PCI board for operation of CAN networks, using microcontroller 68360, also available for DeviceNet | Hardware Manual (570 kB) |
| CAN-PCI/405 |
High performance CAN PCI board for operation of 2 or 4 CAN networks, using AMCC PowerPC 405 | Hardware Manual (1.1 MB) |
| CAN-PCI/405-B4 |
High performance CAN PCI board for operation of 4 CAN networks, using AMCC PowerPC 405, DSUB37-connector / 1 slot | Hardware manual not available as PDF-file. |
| ISA-Bus Boards | ||
| CAN-ISA/331 |
High performance CAN ISA board for operation of CAN networks, using microcontroller 68331, also available for DeviceNet | Hardware Manual (500 kB) |
| CAN-ISA/200 |
Passive CAN ISA board for operation of a CAN network | Hardware Manual (420 kB) |
| PC/104, PC/104-Plus and PCI-104-Boards | ||
| CAN-PCI-104/2000 |
Intelligent CAN PCI-104 board, one or two CAN networks, option: with additional PC/104 connector compatible to PC/104-Plus systems | Manual not available at the moment |
| CAN-PCI-104/200 |
CAN PCI-104 board, one or two CAN networks, option: with additional PC/104 connector compatible to PC/104-Plus systems | Hardware Manual (1.3 MB) |
| CAN-PC104/331 |
Intelligent CAN PC/104 board, one or two CAN networks, 68331 microcontroller | Hardware Manual (430 kB) |
| DN-PC104/331 |
Intelligent DeviceNet PC/104 board, one or two DeviceNet channels, 68331 microcontroller, local DeviceNet Firmware | Hardware
Manual (230 kB) DeviceNet-API Manual (180 kB) |
| CAN-PC104/200 |
CAN PC/104 board with one CAN network, 3 CAN controllers as standard: 82527, 8191 and SJA1000, designed for starter kits and development | Hardware Manual (400 kB) |
| CompactPCI Boards | ||
| CPCI-405-A |
CPCI-Target Adapter with PowerPC IBM 405GP, 375 MIPS, 200/266 MHz, up to 64 Mbyte RAM, Ethernet, up to 2x CAN, up to 2x RS-232, also available for DeviceNet | Hardware Manual (960 kB) |
| CPCI-CAN/360 |
High performance CAN CompactPCI board, one or two CAN networks, 68360 microcontroller, extended temperature range available | Hardware Manual (290 kB) |
| CPCI-CAN/331 |
Intelligent CAN CompactPCI board, one or two CAN networks, 68331 microcontroller, also available for DeviceNet | Hardware Manual (370 kB) |
| CPCI-CAN/200 |
CompactPCI CAN-Interface, PCI Bridge PLX PCI9030, up to 2x CAN, extended temperature range available | |
| Other CAN-Interface Boards | ||
| CAN-PCC |
CAN PC CENTRONICS interface module | Hardware
Manual (485 kB) Software Manual (55 kB) Installation Notes (5 kB) |
| PMC-CAN/331 |
Intelligent PMC CAN board, one or two CAN networks, 68331 microcontroller, also available for DeviceNet | Hardware Manual (590 kB) |
| PMC-CAN/266 |
Passive 66 MHz-PCI PMC-CAN board, up to 2x CAN | Hardware Manual (700 kB) |
| EtherCAN |
CAN-Ethernet gateway, ARM-processor NET+50, 10/100BaseT Ethernet | EtherCAN
Manual (900 kB) ELLSI Manual (250 kB) |
| CAN-USB/2 |
Compact intelligent USB 2.0-CAN module, one CAN network, ARM LPC 2292 microcontroller, USB supports Hi-Speed rate of 480 Mbit/s | Hardware Manual (720 kB) |
| CAN-USB-Mini |
Compact intelligent USB CAN module, one CAN network, MB90F543 microcontroller | Hardware Manual ( 590 kB) |
| CAN-Bluetooth |
Intelligent Bluetooth CAN board, one CAN network, PowerPC IBM 405CR | Hardware Manual (1.1 MB) |
| CAN-Gateway |
DeviceNet-CANopen interface, stand-alone system, C167 and 82527 controller | Hardware
Manual (450 kB) Software Manual (35 kB) |
| PLC Interface Modules | ||
| CAN-DP |
Profibus-DP / CAN-Gateway, compact top-hat rail module, PowerPC IBM 405 | Hardware
Manual (1.2 MB) Software Manual (600 kB) GSD_CAN.zip File (510 kB) |
| CANopen-DP |
Profibus-DP / CANopen-Gateway, compact top-hat rail module, PowerPC IBM 405 | Hardware
Manual (1.3 MB) Software Manual (1.1 MB) GSD_CANopen.zip File (180 kB) |
| CAN-CBM-DP |
Profibus-DP / CAN-Gateway, compact top-hat rail module, 68331-microcontroller | Hardware
Manual (750 kB) Software Manual (800 kB) Hex-Parameter Ext. (35 kB) GSD.zip File (1.6 MB) |
| DN-DP |
Profibus-DP / DeviceNet-Gateway, compact top-hat rail module, PowerPC IBM 405 | Hardware
Manual (750 kB) Software Manual (600 kB) GSD.zip File (9 kB) |
| DN-CBM-DP |
Profibus-DP / DeviceNet-Gateway, compact top-hat rail module, 68331-microcontroller | Hardware
Manual (750 kB) Software Manual (600 kB) GSD.zip File (8 kB) |
| CAN-CSC515 |
Interfacing between Siemens-PLC S5-±15U, S5-135U or S5-155U and CAN participants, higher layer protocol master | Hardware
Manual (520 kB) Software Manual (150 kB) |
| DN-CSC515 |
Interfacing between Siemens-PLC S5-115U, S5-135U or S5-155U and DeviceNet participants, higher layer protocol master, for DeviceNet | Hardware
Manual (610 kB) Software Manual (55 kB) |
| CAN-CSC595/2 |
Interfacing between Siemens-PLC S5-95U, S5-100U or ET-100U and CAN participants, complete Firmware for operation included, also available for DeviceNet as DN-CSC595/2. | Hardware
Manual (450 kB) Software Manual (980 kB) DeviceNet-Softw. (60 kB) |
| CAN/CAN Interface Modules | ||
| CAN-CBM-Bridge/2 |
Intelligent CAN-bridge, coupling two CAN nets with different bit rate | Hardware Manual (400 kB) |
| CAN-Repeater |
Passive I- or Y-repeater, compact top-hat rail module | Manual (400 kB) |
| VMEbus Boards | ||
| VME-CAN4 |
Intelligent VMEbus
board for operation of up to 4 separate CAN networks, including each one CPU
68331, 20 MHz and full-CAN controller SJA1000, also available for DeviceNet |
Hardware
Manual (770 kB) Software Manual (205 kB) VxWorks-API Manual (125 kB) |
| VME-CAN2,
VME-CAN2B |
Intelligent VMEbus board for operation up to 2 separate CAN networks with CPU 68000, 20 MHz and full-CAN controller 82527 (VME-CAN2B) or basic-CAN controller 82C200 (VME-CAN2) | Hardware
manual not available as PDF-file. Software Manual (140 kB) VxWorks-API Manual (125 kB) |
| Intelligent CAN Controller | ||
| CAN-CTERM |
CAN embedded controller with display and keyboard | CTERM-Hardware
M. (190 kB) CPC-Hardware Manual (960 kB) CPC-Software M. (German, 4.8 MB) |
| CAN-CTERM-L |
CAN bus terminal with display and keyboard | Hardware manual not available as PDF-file. |
| EPPC-405 |
Stand alone PowerPC 405GP, 375MIPS, 200 MHz, with Ethernet for 10 and 100 Mbit/s and up to 2 CAN and/or DeviceNet interfaces | CPCI-405
Hardware M. (960 kB)
EPPC-405 Hardware M. (260 kB) |
| CAN-Control-CPU
|
Controller board with 68376 microcontroller, digital and analog I/Os in 19" plug-in case | Manual (680 kB) |
| CAN-CBM-PLC/331
|
Compact-automation computer with CAN and serial interface | CBM-PLC/331-1
Manual (770 kB) CBM-PLC/331-2 Manual (930 kB) Further Documentation (1 kB) |
| CAN-CBX-Series | ||
| CAN-CBX-CPU5200 |
Compact PLC with InRailBus for CBX-I/O modules, PowerPC MPC5200 with FPU, optional CoDeSys programming system, 2x CAN, Ethernet | CAN-CBX-CPU5200 Manual (German 2,5 MB) |
| CAN-CBX-AI814 |
CANopen module with In-Rail-Bus, 8 analog inputs, 14 bit | CAN-CBX-AI814 Manual (2.5 MB) |
| CAN-CBX-AI420 |
CANopen module with In-Rail-Bus, 4 analog sigma-delta A/D-converter inputs, 20 bit | CAN-CBX-AI420 Manual (2.5 MB) |
| CAN-CBX-AO412 |
CANopen module with In-Rail-Bus, 4 analog outputs, 12 bit | CAN-CBX-AO412 Manual (2.3 MB) |
| CAN-CBX-DIO8 |
CANopen-I/O module with In-Rail-Bus, 8 digital in/outputs, 24 V input voltage, up to 1 A output current | CAN-CBX-DIO8 Manual (2.9 MB) |
| CAN-CBX-REL4 |
CANopen-I/O module with 4 relay outputs (2 change over contacts, 2 normally open contacts) | CAN-CBX-REL4 Manual (2.7 MB) |
| CAN-CBX-AIR |
Wireless CAN-Bridge, CAN telegram filtering, ISM-band (2.4 GHz), external antenna | CAN-CBX-AIR Manual (1.6 MB) |
| CANbloc-Mini I/O-Series | ||
| CAN-CBM-AI410 |
Compact low cost CANopen module, 4 analog inputs, 10 bit | Hardware
Manual (600 kB) Software Manual (230 kB) |
| CAN-CBM-AI4 |
Compact low cost CANopen module, 4 analog inputs, 12 bit | CAN-CBM-AI4
Manual
(110 kB) Base Manual CBM-DIO8 (190 kB) |
| CAN-CBM-AO4
|
Compact low cost CANopen module, 4 analog outputs, 12 bit | CAN-CBM-AO4
Manual (270 kB) Base Manual CBM-DIO8 (190 kB) |
| CAN-CBM-DIO8
|
Compact low cost CANopen-I/O module, 8 digital inputs or outputs (user selectable) | CBM-DIO8 Manual (190 kB) |
| CAN-CBM-SIO1/SIO4
|
Compact low cost CAN to 1 or 4 serial interfaces (RS-232, RS-422, RS-485 or TTY) | Hardware
Manual
(760 kB) Software Manual (130 kB) SIO-esd-Protocol Manual (550 kB) |
| CAN-CBM-COM1 |
Compact low cost CAN to 1 serial interface (RS-232, RS-422, RS-485 or TTY), CANopen or esd-layer-2 software | Hardware
Manual (470 kB) esd-Layer-2 Software M. (740 kB) CANopen Software M. (230 kB) esd-CAN-Protocol Manual (390 kB) |
| CBM-REL4
|
Compact CANopen module with 4 relay outputs (2 monostable change over contacts, 2 monostable normally open contacts) | Hardware
Manual (190 kB) Software Manual (83 kB) |
| CAN 19"-Series and CAN-IP65 | ||
| CAN-IP65-DIO8,
AI4, TI4 |
CAN I/Os with IP65 protection: digital inputs (CAN-IP65-DIO8), analog inputs (CAN-IP65-AI4) and temperature sensor inputs (CAN-IP65-TI4) |
IP65-DIO8 Manual (580 kB) IP65-AI4 Manual (150 kB) IP65-TI4 Manual (910 kB) |
| CAN-Control-CPU
|
Controller board with 68376 microcontroller, digital and analog I/Os in 19" plug-in case | Manual (680 kB) |
| CAN-Control-I/O
|
CAN I/O board with 64 digital inputs and 32 digital outputs in 19" plug-in case | Hardware
Manual (720 kB) Software Manual (150 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN Terminals | ||
| CAN-CBM-OP1 |
CAN terminal with display (128x64 pixel) and keyboard | Hardware manual not available as PDF-file. |
| CAN-CBM-OP5 |
CAN terminal with display (240x128 pixel) and keyboard, CANopen | Hardware
Manual (German, 1.7 MB) Software Manual (German, 460 kB) |
| CAN-MINITERM/25 |
CAN terminal with 2x5 LED display and 5 foil keys | Hardware
Manual (German, 710 kB) Software Manual (German, 680 kB) |
| Other CAN Modules | ||
| CAN-Mini-ADI4/DO4 |
Universal module with 4 analog or digital inputs and 4 digital outputs, compact top-hat rail module | Hardware
Manual (German, 500 kB) Software Manual (German, 160 kB) |
| CAN-STEPCON-1H |
High current stepper controller, ± 3A stepper motor output, brake output, 3 limit switch inputs, controller C505C | Hardware
Manual (370 kB) Software Manual (680 kB) |
| CAN-CI488 |
Communication module - connecting IEEE488 devices to CAN | Hardware
Manual (280 kB) Software Manual (350 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN-Clock |
Real Time Clock with CAN interface, serial interface for external GPS (NMEA)- or DCF77- receiver | Hardware
Manual 540 kB) Software Manual (280 kB) |
| CAN-Classic I/O-Modules | ||
| Description
of the I/O modules |
Technical attributes of the CAN I/O modules - overview | |
| Digital I/O-Modules | ||
| CAN-CDIO
16/16 |
16 digital inputs, 16 digital outputs | Hardware
manual not available as PDF-file. Software Manual (160 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN-CPIO
16/8 |
16 digital inputs, 8 digital outputs | Hardware
Manual (German, 1.6 MB) Software Manual (German, 390 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN-CREL
8 |
8 relay outputs | Hardware
Manual (840 kB) Software Manual (310 kB) esd-CAN-Protocol Manual (390 kB) |
| Analog I/O-Modules | ||
| CAN-CAI
812 |
8 analog inputs / 12 bit | Hardware
Manual (910 kB) Software Manual (250 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN-CAI
810 |
8 analog outputs / 10 bit | Hardware
Manual (German, 3.8 MB) Software Manual (German, 1.2 MB) esd-CAN-Protocol Manual (390 kB) |
| CAN-CAO
812 |
8 analog outputs | Hardware
Manual (810 kB) Software Manual (45 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN-CDMS4 |
4 inputs with power supply for strain gauge bridges | Hardware
Manual (German, 1.1 MB) Software Manual (German, 230 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN-CPT100/4 |
4 analog thermal inputs for PT100-sensor | Manual not available as PDF-file. |
| Other Modules of the CAN-I/O-Series | ||
| CAN-CCOM1 |
Communication module for conversion of 1 serial interface to CAN | CCOM1-Hardware
M. (810 kB) CCOM1-Software Manual (200 kB) esd-CAN-Protocol M. (390 kB) |
| CAN-CCOM4 |
Communication module for conversion of 4 serial interfaces to CAN | CCOM4-Hardware
Manual (1.5 M) CCOM4-Software Manual (117 kB) esd-CAN-Protocol Manual (390 kB) |
| CAN-CMIO |
Mixed I/O module, 4 digital inputs and outputs, 2 analog inputs and outputs | Hardware
Manual (German, 850 kB) Software Manual (German, 130 kB) esd-CAN-Protocol Manual (390 kB) |