|
 |
 |
 |
Product News
Download Paper |
J1939 Protocol Stack
SAE J1939 Support for esd CAN Boards and SoC with CAN Support |
 |
all SAE J1939 communication
mechanisms supported (except bridge function) |
|
|
full support for the transport protocols ('TP-BAM'/'TP-CM') to
transmit larger blocks of data |
|
|
quick software
development due to convenient functions |
|
|
automatic handling of
address claiming procedures by callback functions |
|
|
pre-filtering of
messages according to PGN and source address |
|
|
parallel communication with
several ECUs
|
|
|
source code and object
code licenses available |
Download Paper |
CPCI-CAN/400-4
4x CAN: Layer 2, CANopen or ARINC 825
optional IRIG-B, optional PXI-Interface |
|
|
4 CAN
high-speed interfaces according to ISO 11898-2, via DSUB25 |
|
|
33/66 MHz CompactPCI |
|
|
CAN is driven by esd
Advanced CAN Core (esd ACC) CAN controller |
|
|
ARINC 825 protocol available |
|
|
IRIG-B input
(option)
|
|
|
optional PXI-interface on request |
| |
|
Download Paper |
CPCI-CAN/400-2
2x CAN: Layer 2, CANopen or ARINC 825
optional PXI-Interface |
|
|
2 CAN high-speed interfaces according to ISO
11898-2, via 2x DSUB9 |
|
|
33/66 MHz CompactPCI |
|
|
CAN is driven by esd
Advanced CAN Core (esd ACC) CAN controller |
|
|
ARINC 825 protocol available |
|
|
optional PXI-interface on request |
| |
|
Download Paper |
CAN-USB/Micro
Small CAN USB Interface |
|
|
CAN network at USB 2.0 |
|
|
electronic equipment completely integrated in
DSUB9 enclosure |
|
|
power supply via USB |
|
|
low cost CAN
interface for PC
|
| |
|
Download Paper |
ECS-PCIe/1100
EtherCAT Slave Interface for PCI Express |
|
|
make your PC an EtherCAT slave node |
|
|
ET1100 EtherCAT slave controller |
|
|
2x 100BASE-TX EtherCAT
interfaces according to IEEE 802.3
|
|
|
configuration via EtherCAT master
(XML file)
|
| |
|
Download Paper |
ECM-PCIe/8300
EtherCAT Master Board for PCI Express |
|
|
intelligent EtherCAT master board |
|
|
dual NIC to either control two independent EtherCAT slave segments (without support for EtherCAT cable redundancy)
or to control a single EtherCAT slave segment (with support for EtherCAT
cable redundancy) |
|
|
on board real-time operating system
|
|
|
EtherCAT Master API and
EtherCAT Workbench
support |
|
|
network
configuration -
based on EtherCAT Network Information (ENI) files
or via API calls
|
Download Paper |
ECX-DIO8
EtherCAT Digital I/O Module |
|
|
8 digital I/Os |
|
|
inputs 24 V, outputs 24 V / 0.5 A |
|
|
InRailBus |
|
|
100BASE-TX EtherCAT
interfaces compatible to IEEE 802.3
|
|
|
configuration via EtherCAT master
(XML file)
|
| |
|
Download Paper |
EtherCAT Workbench
EtherCAT® Network Configuration and Diagnostic Tool |
 |
|
|
comprehensive EtherCAT configuration tool to create network
configuration files, initialize and monitor an EtherCAT network |
|
|
application supports
offline and online mode |
|
|
built-in EtherCAT master to support an online topology scan as well as
initialization and monitoring of an EtherCAT network |
|
|
export
of ENI configuration files |
|
|
configuration based on
ESI files or ESI data of the devices' EEPROM |
Download Paper |
AMC-CAN4
4 Channel AMC CAN Module |
|
|
cost effective: 4 channels onboard |
|
|
high performance: local data management by FPGA
and PCI Express bus mastering |
|
|
wide software support: drivers for Windows, Linux, QNX and other
operating systems |
|
|
4
High-Speed CAN interfaces according to ISO11898-2
|
|
|
esd Advanced CAN Core (esdACC) CAN
controller implemented in Xilinx Spartan 3e FPGA
|
|
|
CAN interfaces via RJ45 sockets in
the front panel, pin assignment acc. to CiA DR303-1 |
| |
|
Download Paper |
ECX-PoE-PE
Power-Extractor for InRailBus |
|
|
24 VDC power supply for InRailBus (Power over
Ethernet) |
|
|
applicable with esd-ECX and -CBX units |
|
|
hat-rail mounting |
|
|
PoE supply according
to IEEE 802.03at ("PoE+") and compatible to IEEE 802.03af
|
|
|
Ethernet data is passed through
(1000BASE-T) |
| |
|
Download Paper |
CPCI-USB-5
CPCI USB 2.0 Interface with 6 USB Ports |
|
|
5x USB 2.0 Hi-Speed via front panel |
|
|
1x USB 2.0 Hi-Speed via on-board connector |
|
|
sequentially powering up USB ports |
|
|
1x CompactFlash-card
slot on-board (option)
|
|
|
1x SD-card slot on-board (option) |
| |
|
Download Paper |
VME-PMC-CPU/2-CC
VME PowerPC Processor Board with 2 PMC Slots
Conduction Cooled
|
|
|
VMEbus master or slave
functionality, 4-level arbiter |
|
|
address/data up to A64/D64 |
|
|
CPU Freescale MPC 8349 |
|
|
1x Gbit
Ethernet
|
|
|
two single size PMC slots according
to
IEEE Std P1386-2001 |
|
|
PCI 64 bit
at 66 MHz, 3.3 V only |
|
|
I/O routing
according to Vita 35 (P4V2-64ac, P4V2-46dz)
|
|
|
PPMC
according to
Vita 32 |
|
|
one XMC according to Vita 42.3 |
Download Paper |
AMC-ADIO-24
AMC Analog/Digital I/O Module |
|
|
8 analog inputs ±10 V, 16
bit |
|
|
2 analog outputs ±10 V,
16 bit |
|
|
24 digital I/Os, TTL level, programmable output configuration |
|
|
4
trigger I/Os (RS-485), various trigger conditions programmable
|
|
|
FIFOs for inputs and
outputs, DMA to PCIe host memory |
| |
|
Download Paper |
AMC-ADIO-Adapter
Routing Module for har-link® Connector |
|
|
easy wiring of process signals to AMC-ADIO24 module |
|
|
adapter for one har-link® connector to a Combicon connector with
spring-cage contacts |
|
|
optimal signal shielding with har-link®
adapter cable |
|
|
standard mounting at DIN-EN rail |
|
|
connection to all I/O types of the AMC-ADIO24: Digital I/Os, analog
inputs, analog outputs or SYNC-ports |
| |
|
Download Paper |
CAN-CBX-CPU5201
Powerful Realtime Controller in a Smart Format
|
|
|
PowerPCTM MPC5121 with FPU,
400 MHz |
|
|
0.5 GB SDRAM, 1GB NAND-Flash
|
|
|
100BASE-TX Ethernet |
|
|
2x CAN, 1x USB 2.0 Full-Speed Host
|
|
|
Profibus-DP slave (as option)
|
|
|
EtherCAT-Master (as
option) |
| |
|
| |
|
Download Paper |
OTC-570
Operator Touch Controller
|
|
|
5.7" TFT-Display with VGA
resolution |
|
|
resistive touch screen
|
|
|
ARM926 based micro controller,
200 MHz |
|
|
CAN, ISO 11898-2, electrically isolated
|
|
|
10BASE-T/100BASE-TX Ethernet
|
|
|
Power over
Ethernet (PoE)-option |
|
|
2x full-speed USB 2.0 Host |
|
|
EtherCAT-Slave (option) |
Download Paper |
PMC-CAN/400-4
4x CAN with ARINC Protocol + IRIG-B
|
|
|
4x CAN ISO 11898-2 |
|
|
ARINC 825 protocol available |
|
|
IRIG-B input |
|
|
33/66 MHz
PCI Interface
|
|
|
conduction cooled version available |
Download Paper
|
VME-PMC-CPU/2
VME PowerPC Processor Board with 2 PMC Slots
|
|
|
VMEbus master or slave
functionality, 4-level arbiter |
|
|
address/data up to A64/D64 |
|
|
CPU Freescale MPC 8349 |
|
|
2x Gbit
Ethernet, 2x USB 2.0 Hi-Speed
|
|
|
two single size PMC slots according
to
IEEE Std P1386-2001 |
|
|
PCI 64 bit
at 66 MHz, 3.3 V only |
|
|
I/O routing
according to Vita 35 (P4V2-64ac, P4V2-46dz)
|
|
|
PPMC
according to
Vita 32 |
|
|
one XMC according to Vita 42.3 |
Download Paper |
CAN-EtherCAT
EtherCAT / CAN Gateway
|
|
|
|
fast
and reliable linking EtherCAT and CAN |
|
|
gateway operates as an
EtherCAT slave with a maximum of 8 Kbytes input or output data on
the EtherCAT bus |
|
|
no
limitation in the number of CAN nodes |
|
|
CAN high-speed interface
(ISO 11898-2) |
|
|
100BASE-TX
EtherCAT interface
|
|
|
|
|
|
|
For detailed information about the
availability of new products and further information about the products
please see data sheet or contact our support team support@esd.eu.
|
|
|
